+33.388.072.392
The essential accessory for the installation of all the adhesives and stickers on your glazed or mural surfaces. Professional quality.
AVAILABILITY / Scraper dimensions |
|||||
| item in stock - delivery within 24/72 hours | |||||
This felt scraper facilitates the installation and respects the adhesive as well as the surface on which it is stuck! Very useful to apply the adhesives more easily, the scraper makes it possible to eliminate the bubbles, while making so that the adhesive as well as possible stuck the support on which it is posed. Constituted of one material at the same time firm and soft (felt) scraper scratch neither the adhesive, nor the pane, contrary to other rigid PVC scrapers. Usable several times. Washable.
Tips: clean first the pane with a mixture of water and liquid crockery. Never use of product containing solvent or alcohol before posing an adhesive.
Dilute some drops of liquid crockery in one liter of water - and project this mixture on the adhesive side of the sticker using a spray, for example. You can also vaporize the pane or the support on which you will pose the adhesive. To then position the adhesive on the pane - to adjust (the fact that the adhesive is wet makes it possible to make easily slip the sticker on the pane) - and to drive out water and the bubbles by exerting a light pressure on the whole of surface using the felt scraper. The felt can absorb most of the water which thus will be "driven out". The light water traces which still remain between the adhesive and the pane will disappear during drying. While thus proceeding, your adhesive will be adjusted perfectly.
The scraper is available in 2 dimensions.
Easy way: for rather broad surfaces, choose the large size (format of scraper n°2), the installation will be largely facilitated by it.